机器规格：YMC-8070系列

CNC door milling safety operation code

1. Operators must receive training before operation, be familiar with master the main specifications technical parameters of Yiming industrial engraving machine tool, master the operation of machine body.

2. The operator must have basic knowledge of numerical control understand the hydraulic system structural performance of the machine tool. The operator must check the machine tool its accessories before starting, including checking whether the power supply voltage are stable whether the gas supply is normal.

3. According to the correct operation procedures, turn on the full power supply, oil pump, control power supply, servo power supply, etc. of the small-sized CNC gantry milling machine, the failure must be carried out according to the specified sequence. In addition to life, machine damage, material damage other factors. No load. No load. When the machine is switched off, the workpiece must be reset to zero.

4. The operator must understand the general alarm content of the machine tool the general method to eliminate the alarm; if the alarm information of the machine tool belongs to the operation information, the operator can operate according to the instructions; if the machine tool belongs to the alarm information, the operator must take corresponding measures inform the equipment manager.

YMC-8070