机器规格：YMC-1210系列

CNC milling machine operation code

1. The operator must be familiar with the structural performance, transmission principle control program of the large engraving milling machine, can operate independently after obtaining the operation certificate.

2. Operators should do three good (management, use, maintenance) four good (use, maintenance, inspection, elimination of faults).

3. Operators must comply with five discipline requirements four equipment maintenance requirements.

4. The operator shall inspect the equipment at any time according to the requirements of the tourism inspection content.

5. Add oil in strict accordance with the requirements of the equipment to achieve five kinds of fixed lubrication (fixed time, fixed point, quantitative, qualitative fixed person).

6. The business of more than two persons is prohibited.

7. It is strictly forbidden to use equipment exceeding exceeding the standard.

8. When the equipment stops for more than 8 hours, the hydraulic lubrication of the machine tool should be started 5-10 minutes before the manual operation of each moving shaft to determine whether the operation of each component is normal; the manufacturer of the four axis engraving milling machine can start up after confirming that the operation is normal the lubrication is good, there is no alarm.

9. Before working, the cutting amount should be selected according to the material, technical requirements tool material, the machining program should be written correctly. 10. The spindle displacement must be carried out in the stop state. If the gear is in position, the motor can be started. After stopping, the gear shift will proceed until it is correct.

YMC-1210