Selection of main parts of CNC milling machine & Precision Mould

CNC milling machine mainly adopts high-speed CNC system. One is high-speed CNC system, which can ensure the contour accuracy in high-speed low-speed conversion consistency; the other is the high-rigidity characteristics of the fixed parts of the machine tool, such as bed, beam column, to resist the acceleration impact of moving parts ensure the softness of moving parts such as worktable.

The technical requirements of Yiming CNC engraving milling machine are very high. For example, the automatic cutter is a standard random part of Yiming gantry milling machine (many other manufacturers use it as optional part addition value). The tool length can be accurately measured (within 0.002mm), so as to improve efficiency, reduce human error minimize tool path. Attention should be paid to the difference between the automatic cutter of Yiming CNC engraving milling machine the CNC milling machine. Because of the small cutter (0.1 mm) the small bit less than 1 mm, the pressure must be small. At present, the main brands of cutting tools used in this industry are meidelong, ITI Baocheng.

Domestic CNC lathe is still in the minds of many people is still a poor quality image logo, then what is the reason for domestic CNC lathe has been criticized by everyone! What countermeasures should we adjust change

What's going on? Today, Daheng network editor will discuss with you the reasons for the poor quality of domestic mobile phones the improvement measures. Let's analyze what are the root causes for the poor quality of domestic CNC lathe?

-The level of key components of supporting facilities is high. CNC lathe manufacturing industry has been in the world economic cycle system circle for a long time. In addition to individual conditions, there are very few key components that are difficult to buy

All components are imported components, the quality may be better. In fact, for a perfect excellent CNC lathe company, has the whole equipment cost-effective, component quality is very good? This is typical for their own goods

It's the real reason why the quality is ideal.

2、 Less investment in R & D unscientific design scheme. China's CNC lathes are generally imitated overseas CNC lathes. This is to say that it is easy for us to innovate independently, but we just want to be eager for quick success instant benefit surpass the curve. However, in being fixed

The accumulation of technology can be leapfrogged in a short period of time. Let alone achieve the 80% level of overseas CNC lathes, many of them can't even reach the level of 50% in Chengdu City. Even if the milling machines purchased overseas CNC lathes are used to assemble the whole equipment, the quality is still different

Small. The reason for the low R & D investment is the polarization caused by the poor competitiveness operation capacity of domestic CNC lathes, the direct cause of poor quality.

3、 Numerical control lathe is counterfeited, bad money drives out bad money, only to reduce the quality of the war. Overseas CNC lathes have solid quality high price. They have been driven away by bad currency. None of this reason was created.