CNC engraving  milling machine
Your current location : Home >> News >> Technical Q&A

What are the factors that cause the laser head of high-speed drilling tapping machine emitting light? CNC engraving milling machine manufacturers tell you

2020-06-15 H:06:04
second

Large scale engraving machine high-speed drilling rig has been used in industrial production. For the convenience of production, Yiming drilling milling center is also a common scene. How does a high-speed drilling platform work? Take a look at the editor's brief analysis. Here are the details.

The installation of high-speed drilling rig the assembly of drill bit shall be carried out according to the specifications, shall be erected placed on the drilling rig.

The high-speed drilling rig should be carried out by skilled professionals, the debris in the settling tank should be removed at any time. At the same time, keep the mud clean circulating to prevent collapse drilling.

Before the high-speed drilling rig runs, each part of the control handle is in the empty position. With the human disk drive is blocked, then start the motor unloading operation to confirm that all are normal can work.

The factors that cause the laser head of high-speed drill bit of Yiming engraving machine do emit light:

1. Self check point shooting, no light to send data (check the correct computer settings).

2. Press the test key on the console to observe the ammeter status without current, check whether the laser power supply is connected, whether the high-voltage wire is loose, whether the signal line is loose, if there is current, check whether the lens is broken whether the optical path is seriously moved.

3. Check whether the water circulation system of CNC drilling rig is normal, whether the pump is damaged, whether the inlet outlet are connected whether the pipeline is broken.


造成高速钻攻机激光头不发光的因素有哪些?太阳成集团tyc4633厂家告诉你

Label

Recent:

Related products

Related news

  • Message