There are many customers to ask - some problems often encountered when using Yiming engraving machine. Now we are sorting out the technical information about the maintenance of Yiming CNC engraving milling machine for customers' reference

1: Engraving machine axis green mountain does move abnormal

1: Loose faulty control card.

2: The drive of the corresponding shaft fails.

3: The corresponding shaft stepper motor is faulty.

4: The corresponding coupler is broken loose.

5: The corresponding screw nut is broken.

6: The corresponding shaft has sliding fault.

Actuator subdivision, current software settings are different.

2： Z-axis CNC engraving milling machine out of control

1: Loose faulty control card.

2: Electrostatic interference.

3: Z-axis motor circuit fault

4: Error in document path

5: Inverter interference

6: A computer system virus

7: Business error

After deep processing, there are burr edge on the surface side

Nowadays, the production processing of products workpieces have higher higher requirements on the surface layer, it is acceptable for the appearance of burr batch edge. If the product workpiece is adjusted with a file knife, the precision quality of the product workpiece will be harmed

These specifications, to ensure the immediate application after cutting, it is no longer necessary to carry out grinding polishing in the middle later stages. But in the specific production manufacturing, there will still be a lot of burr its batch front. But to deal with this problem, cutting tools

Must pay attention to the application of special CNC blade to ensure sharp drilling. Titanium Hao machinery equipment is to rotate, ball screw, shaft production processing, machining center production processing, collet boring cutter, bobbin extension rod

The star product of the enterprise, in addition, it is also necessary to do a good job in the overall planning of the fine carving software. In order to improve the secondary smooth fine carving software, it is necessary to first produce process the surface layer, then the side then the surface layer, so as to ensure that there is no wool

It is very effective for those parts which can be polished.

Deep processing for special appearance products

For the deep processing of some unique product parts, the mobile phone software will generally appear linear fitting deviation. Sometimes if the deviation is too large, it will lead to the deformation of the product workpiece harm the appearance. To deal with this problem,

It is necessary to control the deviation the mobile phone software. This marking value is relatively effective, which does harm the measurement speed does cause deformation to the product workpiece.