The one Ming CNC carving milling machine adopts horizontal four axis CNC drive mode. Both ends of the machine can milling the workpiece at the same time, the remaining two ends of the surface simultaneously complete the drilling of the center hole the two ends of the outer ring of the automobile. It has the advantages of high precision, rigidity, good stability, flexibility, high processing efficiency sudden performance. It is the addition of crankshaft, camshaft, gearbox oil, Mada shaft, transmission shaft other shaft parts Very ideal equipment.

The daily maintenance method of Yiming CNC carving milling machine is the most important part of our daily use:

1. establish appropriate use environment

The environment of NC drilling machine will affect the normal operation of the machine tool, so the installation conditions requirements of the machine tool should be strictly required. Under economic conditions, in order to facilitate the isolation installation of the maintenance rig the ordinary machining equipment, it is easy to maintain maintain.

2. provide CNC drilling machine personnel

These personnel should be familiar with the mechanical parts, CNC system, strong electric appliances, hydraulic pneumatic parts of the machine tool, as well as the operating environment, processing conditions, etc., can use CNC correctly according to the machine tool system instructions.

3. maintenance of long-term CNC drilling machine

When the NC drill machine is idle, it is necessary to keep the power of the large CNC engraving machine system make it run in the air when the machine is locked. In rainy season of atmospheric humidity, electric power shall be used every day. Moisture in numerical control cabinet can be driven away by heat of electrical components.

4. Maintenance maintenance of CNC hardware control components

The number of maintenance electricians per year. Check whether the reference voltage is within the specified range, such as output voltage of power module, reference voltage of numerical control unit, if normal dust removal; check whether the connection of electrical components in the system is loose; check whether the function module is in normal operation with fan remove dust. For long-term machine tools, it is necessary to start running for four hours a month to extend the service life of CNC drilling machine.